Emergency Electrician in Hammersmith and Fulham
44 qualified electricians available for emergency electrician in Hammersmith and Fulham, London. Upfront pricing, book online.
Get AI report
44 electricians for emergency electrician in Hammersmith and Fulham
2K Electrical Services
Hammersmith and Fulham, W12 0NF
3MF Construction Electrical
Hammersmith and Fulham, W6 7PU
Alan Reekie
Hammersmith and Fulham, SW6 4DR
ALB Building Services Ltd
Hammersmith and Fulham, W6 8JA
Aplite Services Ltd
Hammersmith and Fulham, W12 0TE
Arash Amjady
Hammersmith and Fulham, W14 0LW
Archer Electrics Ltd
Hammersmith and Fulham, W12 7DP
City Response TA Guinness Property
Hammersmith and Fulham, W6 0LJ
CIULLO ENGINEERING LTD
Hammersmith and Fulham, W6 9HB
Daddy Electrician Ltd
Hammersmith and Fulham, SW6 3JD
Daniel Paul Electrical Contractors
Hammersmith and Fulham, W12 8HJ
Dominique Peter Pechon
Hammersmith and Fulham, W12 9PZ
Electrical and Building Services
Hammersmith and Fulham, W12 7AL
Fast Response Property Maintenance Ltd
Hammersmith and Fulham, SW6 7JY
Fortuna Electrical Contractors Ltd
Hammersmith and Fulham, W6 9HX
Gemelectric
Hammersmith and Fulham, W6 9PB
H&M Design and Build LTD
Hammersmith and Fulham, W14 0AB
Husky Electrical
Hammersmith and Fulham, SW6 2RT
Impulse Electrical Services
Hammersmith and Fulham, W6 8QR
Kensington & Chelsea Electrical Services
Hammersmith and Fulham, SW6 1AW
About emergency electrician in Hammersmith and Fulham
An emergency electrician provides urgent call-out services for electrical faults that pose an immediate safety risk or have left your property without power. Common emergencies include complete power loss, burning smells from sockets or the consumer unit, visible sparking, tripping that cannot be reset, exposed live wiring, and electrical faults following water leaks or storms. The electrician's first priority is to make the installation safe — isolating the faulty circuit, identifying the cause, and carrying out immediate repairs where possible. If a permanent repair requires further work, the electrician will make the situation safe and advise on next steps.
Electrical emergencies can be life-threatening. A burning smell from a socket indicates overheating that could start a fire. Sparking suggests an arc fault that can ignite surrounding materials. Complete power loss may indicate a serious fault rather than a simple supply issue. These situations require immediate attention from a qualified electrician who can diagnose the problem, isolate the danger, and make the installation safe. Do not attempt to investigate electrical emergencies yourself — particularly anything involving burning, sparking, or water near electrical installations.
What's included
- Emergency call-out and attendance within agreed timeframe
- Safety assessment and risk evaluation on arrival
- Isolation of faulty circuits to make the installation safe
- Fault diagnosis using test equipment
- Immediate repair of the fault where possible
- Replacement of failed components (MCBs, RCDs, sockets, switches — common parts carried on van)
- Testing of repaired circuits
- Minor Works Certificate for completed repairs
- Written report and recommendations if further work is needed
Typical cost
Emergency Electrician in Hammersmith and Fulham typically costs £100–£300 per call-out. Every job is different — describe what you need and a qualified electrician will quote you directly.
Regulations & standards
- BS 7671:2018+A2:2022 (IET Wiring Regulations, 18th Edition): All emergency repair work must comply with the current Wiring Regulations. Even in an emergency, the repair must be safe, properly tested, and documented. A Minor Works Certificate is issued for repairs; an EIC if new circuits are added.
- Health and Safety at Work etc. Act 1974: Both the electrician and the property occupier have a duty of care. The electrician must not work in conditions that are unsafe (e.g., standing water near live equipment) without appropriate precautions.
- Electricity at Work Regulations 1989: Requires that electrical systems are maintained to prevent danger. Emergency repairs must be carried out to a standard that prevents the fault from recurring and does not create new hazards.
Emergency Electrician FAQs
What counts as an electrical emergency?
An electrical emergency is any situation that poses an immediate risk to life or property: burning smell from electrical fittings, visible sparking, exposed live wiring, total power loss that cannot be restored by resetting the consumer unit, electrical shock from an appliance or fitting, and water ingress into electrical installations. If in doubt, treat it as an emergency — it is better to call and be told it is not urgent than to ignore a potential danger.
Should I turn off the main switch before the electrician arrives?
If you can reach the main switch safely and there is no fire or flooding, yes — turning off the main switch is the safest action. This isolates all circuits and removes the immediate danger. If you cannot reach the switch safely (e.g., the consumer unit is in a flooded area or there is smoke), leave the property and wait for the electrician.
How much does an emergency electrician cost?
A typical emergency call-out is £100-200 for attendance, plus an hourly rate of £50-90 for the repair work. Out-of-hours calls (evenings, weekends, bank holidays) are at the higher end. Most straightforward emergency repairs are completed in 1-2 hours, so expect a total cost of £150-300 for a typical call-out.
My power has gone off but nothing has tripped — what should I do?
If nothing has tripped on your consumer unit and you have no power, the fault is likely with the DNO supply. Check with your neighbours — if they are also affected, call 105 (the national power cut number) to report a supply failure. If only your property is affected, the fault may be in your main fuse (cut-out), which is the DNO's responsibility. Call your DNO rather than an electrician.
Can an emergency electrician do a permanent repair or only a temporary fix?
Most emergency repairs are permanent — replacing a faulty socket, re-terminating a connection, or fitting a new MCB/RCD. If the fault requires more extensive work (e.g., replacing a damaged cable behind a wall), the electrician will make the situation safe and arrange a follow-up visit for the permanent repair.
What should I do if I get an electric shock from an appliance?
If someone receives a shock, do not touch them while they may still be in contact with the electrical source. Turn off the supply at the main switch if you can reach it safely, or use a non-conductive object (wooden chair, dry towel) to separate them from the source. Call 999 if they are injured. Once safe, do not use the appliance or circuit again until an electrician has inspected it. Even a minor shock indicates a fault that needs urgent investigation.
Run a maintenance company?
Get an AI report on how Tradejoy can handle enquiries, quotes, scheduling, customer updates, payments, traders, and certificates across your team.
Get AI report