Socket & Plug Installation in Barnet
191 qualified electricians available for socket & plug installation in Barnet, London. Upfront pricing, book online.
Get AI report
191 electricians for socket & plug installation in Barnet
147 Electrical Services
Barnet, NW7 3RA
3 Wires Electricians Ltd
Barnet, EN5 2SW
A & B Electrical Services
Barnet, EN5 3EG
A H Fire Preventions Limited
Barnet, NW11 9ES
A Sparky TBS
Barnet, EN4 8EL
A.ELECTRICAL SERVICES LTD
Barnet, N3 2QN
AC Building Maintenance Ltd
Barnet, N2 0EB
ACLA Services Ltd
Barnet, EN4 8QA
Adi Electrics
Barnet, N10 2PD
AGE GREEN ELECTRICAL LIMITED
Barnet, NW2 1DJ
AJG Electrical
Barnet, NW7 4QE
Ali Abadi
Barnet, N12 0DY
All Services 4 U
Barnet, N11 1GN
Ally Electrical Services Ltd
Barnet, EN5 2NP
Alston Electrical Services
Barnet, EN5 4HH
Anuta V Electrical Services Ltd
Barnet, NW9 5LE
Arkadiusz Karpa
Barnet, N12 0LP
ARYEH ELECTRICAL LTD
Barnet, NW11 0LY
ASAS Group
Barnet, NW9 5DT
Austin Turner & Co Ltd
Barnet, EN5 5SJ
About socket & plug installation in Barnet
Adding or relocating a power socket involves running a new spur or radial circuit from an existing circuit or consumer unit, mounting the back box, and connecting to the ring main or radial. Whether you need extra sockets in a kitchen, USB charging points in a bedroom, or a weatherproof outdoor socket for the garden, the work must be carried out safely and to current wiring standards. A qualified electrician ensures the circuit can handle the additional load and that the installation meets BS 7671.
Adding a new socket circuit or extending an existing one is notifiable electrical work under Part P of the Building Regulations when it involves work in kitchens, bathrooms, or outdoors. Even in other rooms, electrical work must comply with BS 7671. Overloading circuits with extension leads and adapters is a leading cause of domestic electrical fires in the UK — properly installed sockets eliminate this risk.
What's included
- Assessment of existing circuit capacity
- Supply and installation of socket (single, double, or USB type)
- Cable run from feed point to new socket location
- Flush or surface-mounted back box installation
- All cable, fixings, and connector blocks
- Circuit testing to BS 7671 standards
- Minor Electrical Installation Works Certificate (MEIWC)
- Part P Building Control notification where required
Typical cost
Socket & Plug Installation in Barnet typically costs £80–£200 per socket. Every job is different — describe what you need and a qualified electrician will quote you directly.
Regulations & standards
- Part P of the Building Regulations (Approved Document P): Socket installation in kitchens, bathrooms, and outdoors is notifiable work. It must be carried out by an electrician registered with a competent person scheme, or inspected by Building Control.
- BS 7671:2018+A2:2022 (IET Wiring Regulations): All socket installations must comply with the current edition of the Wiring Regulations, covering circuit design, cable sizing, protection, and safe zones for cable routes.
- IET Guidance Note 1 — Selection and Erection: Provides detailed guidance on socket outlet positioning, spacing, and installation methods, including minimum heights and distances from heat sources and water.
Socket & Plug Installation FAQs
Can I add a socket to a ring main myself?
Technically, adding a socket in a room that is not a kitchen, bathroom, or outdoors is not notifiable under Part P. However, the work must still comply with BS 7671 and be safe. If in doubt, use a qualified electrician — the cost is modest and you get a certificate proving the work is safe.
What is the difference between a spur and a ring main extension?
A spur is a branch cable taken from an existing socket or junction box on the ring main. It feeds one single or double socket. A ring main extension involves breaking into the ring and adding new cable to form a larger ring. Spurs are simpler but limited to one outlet per unfused spur.
How many sockets can a ring main support?
A standard 32A ring main wired in 2.5mm² cable can serve a floor area of up to 100m². There is no fixed limit on the number of sockets, but the total load must not exceed 7,200W. In practice, a typical ring main comfortably serves 10-15 double sockets.
Do I need an outdoor socket on its own circuit?
Not necessarily, but it must have RCD protection (30mA trip). It can be supplied as a fused spur from an existing RCD-protected circuit, or on a new dedicated circuit. The socket must be IP66 rated and fitted with a weatherproof enclosure.
Can USB sockets replace standard sockets?
USB sockets fit into the same back box as a standard double socket and provide 13A outlets plus USB charging ports. They are a direct replacement but slightly deeper — check your existing back box depth (25mm minimum for most USB socket modules).
Run a maintenance company?
Get an AI report on how Tradejoy can handle enquiries, quotes, scheduling, customer updates, payments, traders, and certificates across your team.
Get AI report